Learning and making new things

 When we spent time with Lindsey, I also wanted to learn how to solder small pebble forms side by side...

I had made 6 or seven small pebble forms here and my goal was to try and link them up to maybe make a pair of earrings.

Playing with layout and which pebbles went where.

Learning how to solder side by side.

Soldered. 

The thing I was wary of is that if you have already soldered once (to form the pebble) if you solder again too close to that join, it may well melt. So that is a good thing to avoid if possible. 

Success.

 

And then rolled through the rolling mill.

Then polished and made up into earrings just to see if they might work. Pretty happy with the results, although I think I might change the earwires to a stud, to make them not quite so dangly.

And I finished the commissions! I was able to access Lindsey's rolling mill, so put all of the pebble forms I had made through the mill which looks a whole lot nicer than the effect I can achieve simply by hammering. And then they were all oxidised in the workshed and put together.

Then two reminders of the beauty of nature... a seagull and a field of bog cotton.