I am an old fashioned cut and paste girl when it comes to making.
At times, I wish I were a modern graphic designer girl who could do all the whizz-bangery that would see my plans and designs appear magically and perfectly on the screen; that would let me move things around and change colours and the look and feel of everything.
But alas no, I am not that woman. And I don't really think I will ever be - I doubt I have the energy to study and learn in depth what I would need to know in order to do this.
So instead, I sit, I draw, I cut, I paste. I move things around. I stick things together and I blu-tac them to the windows!
This work is all part of the design work for the windows of a new building in Melbourne.
I am learning heaps as I basically design and then commercialise my work. As ever, my work is slow and I sit and I think, and I calculate and measure and plan and hope and test and try and ....
In a while I will know if it all works!
I wrote some words and placed them on pages indicative of the size of the windows then laid them out on the studio floor to check.
Then I moved back to the house to do the serious number-crunching!
And laid them out on the floor there - this time having prepared pages that were the exact size of each window (each window is a different size) and added diamonds to break up the words and make them easier to read. Part A is about having two lines of words running across the seven windows
You can see how I even cut and pasted the paper to make the background pages the right size!
And then it was back to measuring and calculating. I have to create a printing schedule - advising the printers how long/tall each word should be printed at. This is after I wrote every word out, scanned it saved, it cleaned it up and then taught myself how to vectorise it so that I can send the files to the printers and they can cut the lettering out.
Part B of the job involves having other words scattered through the rest of the windows, so it was back to drawing up seven windows, writing out the words, cutting them to scale....

And then I measured how high above the centre and how far below the centre each word should be - and how far in from the left hand hand side of the window. I need to send the printer a placement-layout Schedule as well as they will attaching the words to the windows and I want them to put them in the right place. Lots of detailed measurements and writing.
These are all my sketches and notes to myself - next I have to type up and prepare the schedules for both Part A and Part B - four schedules. I am sure it will all happen if I am patient, take my time and double-check everything.
If I was doing a proper and through step by step of the process, there would be another 3 blog posts needed to capture it all I think - I just thought to myself a lot about cutting and pasting as I did this work and thought I'd share my old fashioned ways!
At times, I wish I were a modern graphic designer girl who could do all the whizz-bangery that would see my plans and designs appear magically and perfectly on the screen; that would let me move things around and change colours and the look and feel of everything.
But alas no, I am not that woman. And I don't really think I will ever be - I doubt I have the energy to study and learn in depth what I would need to know in order to do this.
So instead, I sit, I draw, I cut, I paste. I move things around. I stick things together and I blu-tac them to the windows!
This work is all part of the design work for the windows of a new building in Melbourne.
I am learning heaps as I basically design and then commercialise my work. As ever, my work is slow and I sit and I think, and I calculate and measure and plan and hope and test and try and ....
In a while I will know if it all works!
I wrote some words and placed them on pages indicative of the size of the windows then laid them out on the studio floor to check.
Then I stuck a few on the windows to check size and how they looked.
Then I moved back to the house to do the serious number-crunching!
And laid them out on the floor there - this time having prepared pages that were the exact size of each window (each window is a different size) and added diamonds to break up the words and make them easier to read. Part A is about having two lines of words running across the seven windows
You can see how I even cut and pasted the paper to make the background pages the right size!
And then it was back to measuring and calculating. I have to create a printing schedule - advising the printers how long/tall each word should be printed at. This is after I wrote every word out, scanned it saved, it cleaned it up and then taught myself how to vectorise it so that I can send the files to the printers and they can cut the lettering out.
Part B of the job involves having other words scattered through the rest of the windows, so it was back to drawing up seven windows, writing out the words, cutting them to scale....
Laying them out to get a feel for the spacial balance, the word length balance, the height balance and the 'having the right words in the right place' kind of balance as well.

And then I measured how high above the centre and how far below the centre each word should be - and how far in from the left hand hand side of the window. I need to send the printer a placement-layout Schedule as well as they will attaching the words to the windows and I want them to put them in the right place. Lots of detailed measurements and writing.
These are all my sketches and notes to myself - next I have to type up and prepare the schedules for both Part A and Part B - four schedules. I am sure it will all happen if I am patient, take my time and double-check everything.
If I was doing a proper and through step by step of the process, there would be another 3 blog posts needed to capture it all I think - I just thought to myself a lot about cutting and pasting as I did this work and thought I'd share my old fashioned ways!
























































