Tuesday, March 23, 2021

Trying something, and laughing.

Honestly, sometimes there are days.

I have to look at myself and just laugh and wonder 'what were you thinking?'. So here goes.


I have this idea of wanting to stitch a bunch of small cards together.

I want to hang them on the wall

I want to machine stitch them.

I want there to be a gap between them.

I want the stitching in the gap to be good, not chaotic.

Here is my layout. I spent a lot of time working out balances, distances between,  how they might hang; where I could stitch and how that would impact the layout and so on.

You can see with the cards laid out like this, the stitching lines all line up. Still to work out a sewing sequence...

So I thought about how best to pass these cards through the sewing machine. How could I stabilise them so that they were connected whilst sewing, then released and held only by the sewing thread when I had finished?

I had heard tell of something called dissolvable embroidery stabiliser or something so I searched.  Tracked some down at Spotlight (under the counter) and came home thrilled and excited.

And then realised. It dissolves in water. I would have to soak my paper. My paper may disintegrate. My ink might run. Whose idea was this again?

I wondered if I cut a piece big enough, could I tape the cards to it in position (with washi tape) and then sew and then see what happened? Maybe I could sponge it off gently?



It worked pretty well I thought.

Then to the notion of dissolving.


Or simply removing.

And yay, you could tear it away.


Leaving little piles of mess, but the washi tape had held it in place, and then the sheets came away.


Ah ha.... looking like I wanted it to!



I may yet do a test with soaking the paper after sewing and seeing what happens; but for now I have a solution.  I expect the soaked paper might look different and it might be a look I like so it is worth investigating I think. But seriously, I laughed at how I had failed to pay attention to the word 'dissolve' in all of the searching I had done!

All alternative suggestions welcome!

8 comments:

  1. if you laminated them would that help, using a sponging process. Other suggestion make a thin cord by zigzagging over one or two threads using tension on core and using a free motion or indeed ordinary foot with zig zag set to virtually no length. then use the card to create between card bits by straight stitching down it keeping it under tension and then inserting card and sewing through them both.
    other suggestion sewing through card with slightly thickish threads, at edge of card pull it through without cutting threads but then holding this double thread under tension stitch through next card etc
    A lot of thinking off the top of my head.
    Irene in N Ireland

    ReplyDelete
    Replies
    1. Thanks Irene they are excellent suggestions! I think when faced with a dilemma it's interesting to see how creative you can be. I have had email comments suggesting just attach them to copy paper and then rip that off afterwards as well. So many ways into and out of a problem. Go well.

      Delete
  2. Replies
    1. inside my brain can be a scary place at times Mo! Process is either problem solving or getting out of the way of things I reckon. This is very much problem solving process. Go well.

      Delete
  3. Tissue paper? Use blue tack to stick the cards where the stitch won't go through it then tear away carefully. I've never tried but it sounds plausible

    ReplyDelete
    Replies
    1. That does indeed sound plausible Jac - something large enough almost to take the whole design and flexible enough to move through the machine, and yet firm enough to hold the cards and then soft enough to remove. Excellent option - and cheaper than this fancy pants dissolving stuff! Go well.

      Delete
  4. Delighted to find you still blogging!! Made my day!

    ReplyDelete
    Replies
    1. Well, your rediscovery made mine as well! Enjoy!

      Delete

I appreciate your thoughts and comments; thanks for taking the time.